Redding Deluxe Die Set Series B 6mm Cr

DESCRIPTION

Deluxe die sets for bottleneck cases contain three dies. They are a special packaging of the full length sizing die with decapping rod assembly and neck expander, bullet seater die with built in crimp ring and seating plug, plus the neck sizing die with decapping rod assembly with neck expander.

This die set allows you to re-size only the neck of the cartridge case, or the full length. In both cases you will also remove the spent primer.

The standard seating die can also apply a crimp, if required.

These conventional dies have standard threads (7/8" x 14tpi), so can be used on most reloading machines. They are primarily intended for single-stage reloading, but bottle-necked calibres work well on progressive machines too.

Case lube saves wear and tear on the cartridge cases and your reloading equipment; you'll feel the significant reduction in force required to operate the press!

Case lube is essential on these steel dies.

This calibre is part of Redding's Series A category. Dies in Series A represent the most popular calibres Redding produces and are thus offered at the lowest prices. Dies in Series B through D are less and less popular, and correspondingly more expensive to produce.

Custom dies in most calibres are also available on request.

SPECIFICATIONS

• Die material: Titanium Carbide
• Micrometer Adjusted Seating
• Screw thread: 7/8x14tpi

FEATURES

Sizing Dies:

• Full Length sizing die with decaping rod and neck expander (size button)
• Neck sizing die with decaping rod and neck expander (size button)

Seating Die:

• Seating depth set by Adjustment screw.
• Built-in crimp.